CAS Latency (CL) 3T
RAS To CAS Delay (tRCD) 3T
RAS Precharge (tRP) 3T
RAS Active Time (tRAS) 8T
Row Cycle Time (tRC) 11T
Row Refresh Cycle Time (tRFC) 14T
Command Rate (CR) 2T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 3T
Read To Write Delay (tRTW) 4T
Write To Read Delay (tWTR) 2T
Write CAS Latency (tWCL) 1T
Refresh Period (tREF) 200 MHz 7.8 us
DQS Skew Control Avaktiverad
DRAM Drive Strength Normal
DRAM Data Drive Strength 4 (No Reduction)
Max Async Latency 7 ns
Read Preamble Time 5.5 ns
Idle Cycle Limit 16
Dynamic Idle Cycle Counter Aktiverad
Read/Write Queue Bypass 8
Bypass Max 4
32-byte Granularity Aktiverad
CPU egenskaper:
CPU typ AMD Athlon 64, 2000 MHz (10 x 200) 3200+
CPU alias Venice S939
CPU stegning DH-E6
Instruktions uppsättning x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3
Min / Max CPU multiplicerare 4x / 10x
L1 kodcache 64 kB (Parity)
L1 datacache 64 kB (ECC)
L2 cache 512 kB (On-Die, ECC, Full-Speed)
Är detta något jag ska skriva in manuellt inne på BIOS?
Är det något Jag har missat? Jag har läst manualen och minnena är av samma typ, märke och hastighet, av vad jag kan se...(och även i rätt slot)
![Image](http://img118.imageshack.us/img118/6609/cpuz3qi.jpg)
Någon?